Welcome to the official website of Suzhou Hazardtex Mechanical Equipment Co., LTD!

TEL：013771823229／0512 69570129

Language

中文版

English

language 

中国

韩国



NEWS

Your current location：

Home

News

FAQ

WHAT IS ZONE 1

Categories:FAQ
Author:
Origin:
Time of issue:2021-01-19
Views:0

(Summary description)A Zone 1 area is classified as a place in which an explosive atmosphere consisting of a mixture with air or flammable substances in the form of gas, vapour or mist is likely to occur in normal operation occasionally.





WHAT IS ZONE 1

Categories:FAQ
Author:
Origin:
Time of issue:2021-01-19
Views:0

Information

A Zone 1 area is classified as a place in which an explosive atmosphere consisting of a mixture with air or flammable substances in the form of gas, vapour or mist is likely to occur in normal operation occasionally

These are typically process areas where gases are more likely to be present

We are able to convert equipment to Zone 1 standards for use across the world. We are able to meet the following legal certifications

ATEX – Europe

GB – China

IECEX – International

Scan the QR code to read on your phone

Previous: WHY DO I NEED EXPLOSION PROTECTION?

Next: WHAT IS ZONE 2?

Previous: WHY DO I NEED EXPLOSION PROTECTION?

Next: WHAT IS ZONE 2?

More News

Atex forklift small class explanation: how to choose forklift truck models and configuration related knowledge!

The basic operation functions of forklifts are divided into horizontal handling, stacking, picking, loading, unloading, and picking. According to the operational functions that the enterprise wants to achieve, it can be preliminarily determined from the models described above. In addition, special operating functions will affect the specific configuration of the forklift, such as paper rolls, molten iron, etc., which require the forklift to install attachments to complete the special functions.

2021-08-03

Atex forklift small class explanation: How does the noise of the forklift produce?

Check whether the rolling gap between the guide wheel, the roller and the mast is too large. Whether the cooperation gap between the fork and the fork frame beam is too large, these factors will cause the forklift to produce louder noise during use.

2021-07-27

atex forklift tells: knowledge about the oil life of forklift engines!

The forklift maintains the oil filter on time. Long-term use will cause the filter element to be clogged. Serious clogging will force the safety valve to open. After the safety valve is opened, the unfiltered oil directly enters the surface of the movement, which intensifies the wear of the machine parts. , Secondly, the accumulation of impurities in the oil pan will accelerate the failure of the engine oil. Therefore, it is necessary to clean the filter regularly to replace the filter element.

2021-07-20

Explosion proof diesel forklift introduces relevant knowledge about the advantages of forklifts!

Mechanized handling takes less time than traditional manual handling operations, while reducing labor expenditures and costs, and improving work efficiency. In the same handling cycle, the number of actions of the forklift is significantly reduced, the corresponding tire/transmission gear/fuel consumption of the forklift is also reduced, and the operating cost is also reduced.

2021-07-06

…

页脚联系我们

Time of issue:2020-12-07 18:30:37

Suzhou Hazardtex Mechanical Equipment Co., LTD

Address：7-B1 Plant No.59 Weixin Road, Suzhou Industrial Park, Suzhou, Jiangsu Province, P. R. China

Mr. Li: +8613771823229

Miss Huang: +86 512 69570129

Email：haojun.li@hazardtex.com

http://www.hazardtex.com

Service hot line:

Mr. Wu: +8613701544403

Message

Alibaba