Explosion proof counter balance forklift manufacturers tell you that general forklifts are mostly balanced forklifts, just like seesaws, so you must first find the center of gravity of the load. This center of gravity is called the load center, which is half the length of the pallet. Explosion proof counter balance forklift manufacturers tell you that for example, if the size of the pallet is length (D) 1000mm × width (W) 1200mm, then the load center is 500mm.

Explosion proof counter balance forklift manufacturers tell you that the load center of a forklift is mostly 500mm or 600mm, so when you want to know the standard load center of a forklift, you must find out from the specification sheet or forklift diagram of the forklift.
Explosion proof counter balance forklift manufacturers tell you that the tonnage of a forklift refers to the maximum load value of the forklift for loading, unloading, and handling goods, which is designed according to the structural strength of each part, the pressure, and stability of the hydraulic system, etc. The stability of the counterbalanced forklift is simple In other words, it is the lever principle (seesaw), in a critical state, if there is a slight force on the cargo side, the forklift will overturn forward.
explosion proof counter balance forklift manufacturers tell you that in vehicle design, the safety factor is generally set to ≥1.4 to ensure the safe operation of forklifts. The load curve table shows the relationship between the allowable load and the load center, and the operation within the range of the load table value can prevent the occurrence of accidents.
The above information is the explosion proof counter balance forklift manufacturer's introduction and analysis of the working principle of forklifts, hope it helps you.