Explosion proof stacker manufacturers tell you that the racking system using stacking cranes should be numbered according to the row, layer and row of the rack, so as to realize the automatic entry and exit of the warehouse to the designated location, and it is also convenient to use the electronic computer to carry out the storage in the warehouse. manage. In fact, explosion proof stacker manufacturers tell you that most of the latest large three-dimensional automatic warehouses use electronic computers for warehouse management. However, in order to save equipment investment, most of the small automatic warehouses still use manual control and semi-automatic control.

1. Manual control. Explosion proof stacker manufacturers tell you that manual control is when the driver checks the slot number on the driver's desk of the stacking crane, and operates the joystick or button to complete the walking, lifting, and fork in and out.
Second, semi-automatic control. explosion proof stacker manufacturers tell you that semi-automatic control means that the driver presses the button of the required slot number on the driver's desk of the stacking crane, and the crane automatically completes various actions of walking, lifting, and stopping at the designated slot number. place. The movement of the fork in and out is controlled by a manual joystick or with a button. Most of the return actions are to press the return button to automatically return to the original position.
3. Explosion proof stacker manufacturers tell you that automatic control is a form of unmanned operation, the control panel is installed outside the crane, and buttons or punch cards are used as instructions. Therefore, as long as the start button is pressed, the remote control stacking crane can automatically enter and leave the warehouse. Recently, a storage device such as a magnetic core memory is used to store the inventory quantity or variety of each item number, and to carry out in-stock management.
4. Explosion proof stacker manufacturers tell you that computer control is to set up a ground control panel directly connected to the electronic computer, and input the instructions for entering and leaving the warehouse into the electronic computer for centralized control. The incoming and outgoing instructions issued by the electronic computer are stored in the front box calculator on the ground control panel. Calculations such as varieties and times are implemented in the library management.
Explosion proof stacker manufacturers tell you that in large three-dimensional automatic warehouses, this management method of computer-controlled stackers is often used. In the small independent shelf warehouses that have been built, there are also some small electronic computers for warehouse management.
The above information is explosion proof stacker manufacturer's introduction and analysis of the classification of stacker operation, hope it helps you.