1. Driving: explosion proof stacker truck manufacturers tell you that the working conditions of the brakes and the pump station should be checked before the stacker truck is driven, and the battery should be fully charged. Hold the control handle with both hands, and force the vehicle to slowly drive towards the working cargo. If you want to stop, you can use the handbrake or foot brake to stop the vehicle.

2. Explosion proof stacker truck manufacturers tell you that the unloading steps of the stacker truck: (1) When the fork is at a low position, keep it perpendicular to the shelf and carefully approach the shelf, and then insert it into the bottom of the pallet; (2) Return the stacker truck to let the goods Move the fork to the pallet; (3) Raise the fork to the required height, slowly move it to the pallet to be unloaded, and at the same time ensure that the fork can easily enter the pallet and the goods are in the safe position of the fork; (4) Lift the goods Fork until the pallet is lifted from the rack; (5) Back slowly in the aisle; (6) Slowly lower the load while making sure that the fork does not touch the obstacle during lowering. NOTE: Steering and braking operations must be slow and careful during cargo lift.
3. Explosion proof stacker truck manufacturers tell you that the stacking steps of the stacker truck: (1) keep the goods low and approach the shelf carefully; (2) lift the goods to the top of the shelf plane; (3) move forward slowly, when the goods Stop when it is above the shelf, put down the pallet at this point and pay attention that the fork does not exert force on the shelf under the goods to ensure that the goods are in a safe position; (4) Slowly retreat and ensure that the pallet is in a free and firm position; ( 5) Lower the fork to a position where the stacker truck can travel.
4. Explosion proof stacker truck manufacturers tell you that the safety facilities of stacker trucks include (1) main switch: power main switch; (2) foot brake: reliable parking brake; (3) restrictor valve: control the descending speed; (4) Pressure limiting valve: to control the load; (5) Protection net: to protect the driver.
The above information is explosion proof stacker truck manufacturer's introduction and analysis of the operation method of stacker trucks, hope it helps you.