Welcome to the official website of Suzhou Hazardtex Mechanical Equipment Co., LTD!

Tel:013771823229／0512 69570129

语言切换

Language
- 中文版
- English

NEWS

Home page

Atex forklift small class explanation: How does the noise of the forklift produce?

Release time:

2021-07-27

Source:

[Summary Description] Check whether the rolling gap between the guide wheel, the roller and the mast is too large. Whether the cooperation gap between the fork and the fork frame beam is too large, these factors will cause the forklift to produce louder noise during use.

The driver has discovered through long-term driving that the forklift will be noisy after a period of time. How does the forklift noise occur? What are the precautions for operating the clutch to avoid noise? Follow the editor of atex forklift to get a simple understanding!
1. Reasons for the noise problem of electric forklifts
1. Check whether the rolling gap between the guide wheel, the roller and the mast is too large. Whether the cooperation gap between the fork and the fork frame beam is too large, these factors will cause the forklift to produce louder noise during use.
2. The gap between the chain and the chain pin is too large or the gap between the upper and lower nails of the fork and the cross beam of the fork is too large.
3. The fasteners are loose, and the guide wheels and rollers of the car body are severely worn, resulting in a large gap.

2. Matters needing attention
1. When the forklift is driving without using the clutch, do not put your feet on the clutch pedal, so as to avoid the semi-linkage of the clutch, which will affect the power transmission and aggravate the wear of the clutch plates, release bearings and other parts.
2. During driving, whether it is shifting from high gear to low gear or from low gear to high gear, it is forbidden to shift gears without collapsing the clutch.
3. Frequently check and maintain the clearance between the release lever and the release bearing, and check and refuel the clutch release bearing, seat, sleeve, etc. on time.
The above is the editor of atex forklift: a brief introduction to the relevant knowledge of forklifts.