Explosion proof electric forklift manufacturers tell you that the explosion-proof transformation scheme of electric forklifts is often limited by the actual situation of the original vehicle. Therefore, when formulating the explosion-proof transformation scheme, the actual situation of the electric forklift must be combined, and the existing resources of the original vehicle must be used as much as possible. On the basis of resources, the explosion-proof modification design is carried out to achieve the purpose of cost-saving.

1. Design of explosion-proof motor. Explosion proof electric forklift manufacturers tell you that the original car motor can be modified with explosion-proof or increased safety explosion-proof type, and the explosion-proof type used in the modification is determined by the power supply characteristics of the original car motor.
Explosion proof electric forklift manufacturers tell you that DC motors must use explosion-proof structures, this is because DC motors have carbon brushes and sparks are generated during operation.
Explosion proof electric forklift manufacturers tell you that AC motors do not have carbon brushes, so either flameproof or increased safety structures can be used, but the increased safety structure is simple, easy to manufacture, low in manufacturing cost, and easy to maintain. It is recommended to use increased safety. Safe structure.
2. Design of explosion-proof power supply device. Explosion proof electric forklift manufacturers tell you that considering that the battery needs to be charged frequently and the battery plug needs to be pulled and inserted frequently, the battery plug must be an explosion-proof plug to prevent sparks when the plug is unreliable, and the battery plug must be set to prevent positive The structure that the negative pole is mis-inserted.
The above information is explosion proof electric forklift manufacturer's introduction and analysis of how explosion-proof electric forklifts can be retrofitted, hope it helps you.