1. Chassis part. Explosion proof forklift manufacturers tell you that the travel system is a device that ensures the rolling operation of the forklift and supports the entire forklift. It consists of brackets, axles, wheels and suspension devices.

Explosion proof forklift manufacturers tell you that the front axle of the forklift is a drive axle, which is to increase the axle load of the front axle when carrying a load, so as to improve the adhesion quality on the drive wheel and increase the ground adhesion to ensure the drive of the engine. power is fully exerted. The rear axle is a steering axle. The steering device is located in front of the driver, and the levers such as the gear lever are placed on the right side of the driver's seat.
2. steering system. Explosion proof forklift manufacturers tell you that the steering system is a system used to make the forklift move in the direction determined by the driver's wishes. The steering system of the forklift can be divided into a mechanical steering system and a power steering system according to the energy required for steering. two kinds. The former uses the driver's physical energy as the steering energy, and is composed of three parts: the steering gear, the steering transmission mechanism, and the operating mechanism; the latter is a steering device that uses the driver's physical energy and engine power as the steering energy.
Explosion proof forklift manufacturers tell you that under normal circumstances, only a small part of the energy required for forklift steering is provided by the driver, and most of it is provided by the engine. Supplied with steering booster. However, when the steering booster device fails, the driver should generally be able to independently undertake the steering task of the vehicle.
Explosion proof forklift manufacturers tell you that when the forklift is operating, the steering and walking are changeable. In order to reduce the driver's manipulation burden, internal combustion forklifts mostly use power steering devices. There are three types of power steering devices commonly used: integral power steering gear, semi-integrated power steering gear, and steering booster.
4. The braking system is the system that slows down or stops the forklift. Explosion proof forklift manufacturers tell you that it consists of a brake and a brake transmission mechanism. The braking system can be divided into three types: manual braking system, dynamic braking system, and servo braking system according to the braking energy. The former uses the driver's physical energy as the braking energy; the middle relies entirely on the potential energy in the form of air pressure or hydraulic pressure converted from the power of the engine as the braking energy; the latter is a combination of the former and the middle.
On the counterbalanced forklift, the back of the forklift is equipped with a counterweight to balance the quality of the goods in the front of the forklift.
The above information is the Explosion proof forklift manufacturer's introduction and analysis of the composition of the power part of the forklift, hope it helps you.