Welcome to the official website of Suzhou Hazardtex Mechanical Equipment Co., LTD!
TEL:013771823229/0512 69570129
Email:haojun.li@hazardtex.com
language
中国
韩国
韩国
韩国
韩国
韩国
NEWS
Your current location:
Home
>
>
>
customized explosion-proof control cabinet tells: the structural knowledge of the control cabinet!

customized explosion-proof control cabinet tells: the structural knowledge of the control cabinet!

  • Categories:News & Events
  • Author:
  • Origin:
  • Time of issue:2021-09-08
  • Views:0

(Summary description)The cabinet door is 25mm above the ground and 2.5mm thick mounting plate, with 20mm wide U-shaped flanges on both sides, making the mounting plate stronger and easier to handle.

customized explosion-proof control cabinet tells: the structural knowledge of the control cabinet!

(Summary description)The cabinet door is 25mm above the ground and 2.5mm thick mounting plate, with 20mm wide U-shaped flanges on both sides, making the mounting plate stronger and easier to handle.

  • Categories:News & Events
  • Author:
  • Origin:
  • Time of issue:2021-09-08
  • Views:0
Information

How much do you know about the structure of the control cabinet? Let's follow the editor of the customized explosion-proof control cabinet to have a simple understanding!
1. The cabinet door is 25mm above the ground and 2.5mm thick mounting plate, with 20mm wide U-shaped flanges on both sides, making the mounting plate stronger and easier to handle.
2. The three cable lead-in cover plates at the bottom of the box can be replaced with each other, which is convenient to move, easy to lead cables, and easy to open holes for cable entry.
3. There are grounding bolts on the cabinet door. 5. The load-bearing hinge is easy to install and easy to change the cabinet door. The cabinet door can be opened 130°.
4. The plastic sliding device can use the plastic sliding device to pass through the guide rail, and the mounting plate can be pushed into the cabinet from the front of the cabinet. The door is installed with horizontal bars).
5. The back panel can be easily installed and fixed with screws; the cabinet door can also be replaced.
6. Standard MS821 lock, lock the cabinet door at the top, middle and bottom three points.
7. Sealing ring: Polyurethane foam sealing tape to ensure the protection level.
8. Add a waterproof edge at the cabinet door frame to cooperate with the cabinet door sealing ring to prevent water and dust from falling into the cabinet.
9. (Single door) The left and right interchangeable door opening design is convenient to use. The standard modularized mounting hole design is convenient for installation.
10. Inner light, easy to install and test (optional).
11. File bag, convenient for on-site work (optional).
12. Installing beams can also be installed in the cabinet without using the mounting plate (optional).
13. The base, fixed, movable, easy to disassemble and install (optional).
14. The door installation strip is convenient for installation.
15. The full frame side panels, front and rear doors, top and bottom panels of the cabinet can be removed, which can adapt to various requirements and is convenient for installation and maintenance.
In summary, the editor of the customized explosion-proof control cabinet tells: a brief introduction to the structural knowledge of the control cabinet.

Keyword:

Scan the QR code to read on your phone

More News

Quality

Quality explosion proof stacker truck For sale introduces the operating procedures of stacker trucks

Before use, carefully check the hydraulic pipeline of the vehicle for oil leakage, whether the supporting wheels can work normally, and whether there is any blocking phenomenon. It is strictly forbidden to use the faulty vehicle. Open the electric door lock and check the universal meter on the dashboard to observe whether the battery is charged. If a bar on the left end is lit, it indicates that the battery is out of power. Check whether the vehicle's lifting, lowering and other actions are normal.
2021-10-15
quality

quality explosion proof stacker truck For sale introduces the operation precautions of stacker truck

When the ambient temperature is +40℃, the relative humidity does not exceed 50%. At lower temperatures, a higher relative humidity is allowed;
2021-10-14
A

A brief introduction to the relevant knowledge of explosion-proof light from China manufacturer

When replacing the bulb (tube), the explosion-proof light from China manufacturer's explosion-proof joint surface should be properly protected and not damaged; the cleaned explosion-proof surface should be coated with phosphating paste or 204-1 anti-rust oil, and brushing is strictly prohibited Other paints;
2021-10-01
The

The principle of explosion-proof light from China manufacturer

There are two reasons for electrical equipment to ignite flammable gas mixtures: one is sparks and arcs generated by electrical equipment, and the other is heating of electrical equipment surfaces (that is, surfaces in contact with flammable gas mixtures).
2021-09-30
Previous page
1
2
8

页脚联系我们

Time of issue:2020-12-07 18:30:37

Suzhou Hazardtex Mechanical Equipment Co., LTD

Address:7-B1 Plant No.59 Weixin Road, Suzhou Industrial Park, Suzhou, Jiangsu Province, P. R. China

Mr. Li: +8613771823229

Miss Huang: +86 512 69570129

Email:haojun.li@hazardtex.com

http://www.hazardtex.com

 

Service hot line:

Mr. Wu: +8613701544403

Alibaba

Copyright:Suzhou Hazardtex Mechanical Equipment Co., LTD   苏ICP备16005497号-1