This type of atex forklift is the first choice for extremely heavy loads. The dense mass in the rear of the machine offsets the load on the forks. This type of forklift is mainly used indoors and on smooth surfaces, with adjustable support legs. Counterbalance forklifts are most commonly used in warehouses. They are also available in three-wheeled versions for tight spaces.

When choosing an atex forklift, the main criteria to consider are load carrying capacity, lift height, type of power, tire composition and operator ergonomics.

Learn the starting, loading, turning, stacking, pole-reversing, warehouse-moving techniques of atex forklifts, 8-way, S-curve, right-angle turn, fixed-point parking, slope, depression driving skills, load operation, stacking racks, rack lifting, loading , unloading, driving, fork transfer, steering and other operating knowledge.

Atex forklifts are classified as one of the eight types of special equipment in the field of motor vehicles in China. They have the characteristics of strong mobility and high risk, and the quality of the operators is uneven. Forklift safety accidents occur from time to time. The hidden dangers of safety are terrible, but what is more terrible than the hidden dangers is people's lack of safety awareness and indifference to safety.

Before driving, the driver should inspect and clean the site and passages to make them suitable for forklift operations and driving.

Forklifts prevent fuel from entering the diesel engine oil pan. The fuel pan will dilute the oil, reduce the viscosity of the oil, and lose lubrication prematurely. Therefore, diesel engines require sufficient fuel injection pump pressure, good atomization of the fuel injector, and reasonable throttle control. Ensure that the fuel burns completely;

The basic operation functions of forklifts are divided into horizontal handling, stacking, picking, loading, unloading, and picking. According to the operational functions that the enterprise wants to achieve, it can be preliminarily determined from the models described above. In addition, special operating functions will affect the specific configuration of the forklift, such as paper rolls, molten iron, etc., which require the forklift to install attachments to complete the special functions.

Check whether the rolling gap between the guide wheel, the roller and the mast is too large. Whether the cooperation gap between the fork and the fork frame beam is too large, these factors will cause the forklift to produce louder noise during use.

The forklift maintains the oil filter on time. Long-term use will cause the filter element to be clogged. Serious clogging will force the safety valve to open. After the safety valve is opened, the unfiltered oil directly enters the surface of the movement, which intensifies the wear of the machine parts. , Secondly, the accumulation of impurities in the oil pan will accelerate the failure of the engine oil. Therefore, it is necessary to clean the filter regularly to replace the filter element.